GRC Logo Call
01793 488899
grc.enterprise.ltd@gmail.com
Deck Loungers Raised Deck Baroque Rails Rope Deck
    HOME

TIMBER DECKING

BALUSTRADES


ROPE

DECK CARE PRODUCTS
Decking Restorer
Decking Cleaner
Decking Anti-slip
Decking Seal
Sprayable Deck Treatment
Rollable Deck Treatment
Decking Protector
Decking Oil
Decking Stain
Wood Preserver Clear
STAINLESS STEEL CABLE

FIXINGS

BROCHURES

HAMMOCKS

JUNGLE GYM

PRICE LISTS

SITE MAP

ABOUT US

 
Copyright ©
GRC Enterprise Ltd 2010
CUPRINOL DECKING SEAL  
   

  A quick drying, clear water repellent to protect garden decks.

Deck Seal   
  Cuprinol Decking Seal is a convenient way to protect garden decks against the harmful effects of the weather. It has a special wax enriched formula that repels water helping to keep decks drier and easier to clean.

 
  It also helps to prevent the wood cracking and splitting. Cuprinol Decking Seal is a clear treatment that allows the colour of wood to weather naturally.  
       
 
Pack Sizes
5 L
   
 
How Much Is Needed
A 5 litre tub is normally sufficient for:
Smooth planed wood: 40m² with 2 coats
Rough sawn wood: 20m² with 2 coats
Note that absorbent or sawn wood and grooved decking will reduce coverage.
   
 
Where To Use
Cuprinol Decking Seal is suitable for use on all types of timber decking including boards and tiles. Regular application will ensure continued protection. Cuprinol Decking Seal is not intended to be overcoated with other decking or decorative finishes.
   
 
Preparing the surface
Timber specifically sold for decking is normally pretreated with wood preserver to prevent decay. If using unpreserved timber, treat with Cuprinol Wood Preserver Clear and allow to dry for 2-5 days before applying Cuprinol Decking Seal. Seek advice for specific treatment methods for timber used in ground contact. Surfaces should be clean, dry and free from surface coatings, algae and mould. For best results, brush to remove dust and debris, then clean surfaces with water and Cuprinol Decking Cleaner. Rinse well and allow to dry. Resinous or oily wood may affect performance. Wipe clean with white spirit to remove natural oils/resins. 
 
   
 
How to apply
Stir well before use. Apply by brush. Do not allow puddles to form, especially in grooves. Where they do form they should be brushed out before they dry. If required, apply a second coat when the first has dried. Avoid splashing plants. Do not apply in temperatures below 5°C, in damp conditions or if rain, dew or frost is likely before the product can fully dry. Note that Cuprinol Decking Seal may cause some temporary yellowing of light coloured timber. As with many surface treatments, newly treated areas may be more slippery. This is a temporary effect, but extra caution should be taken immediately after application.
   
 
Drying time
2-6 hours depending on drying conditions.
   
 
Cleaning and storage
After use, remove as much Decking Seal as possible from brushes before cleaning with water. Do not use or store in extremes of temperature and protect from frost.
   
       
       
 

Always read the pack instructions carefully before use.