GRC Logo Call
01793 488899
grc.enterprise.ltd@gmail.com
Deck Loungers Raised Deck Baroque Rails Rope Deck
    HOME

TIMBER DECKING

BALUSTRADES


ROPE

DECK CARE PRODUCTS
Decking Restorer
Decking Cleaner
Decking Anti-slip
Decking Seal
Sprayable Deck Treatment
Rollable Deck Treatment
Decking Protector
Decking Oil
Decking Stain
Wood Preserver Clear
STAINLESS STEEL CABLE

FIXINGS

BROCHURES

HAMMOCKS

JUNGLE GYM

PRICE LISTS

SITE MAP

ABOUT US

 
Copyright ©
GRC Enterprise Ltd 2010
CUPRINOL DECKING RESTORER  
   

  Restores grey, weathered decking back to its original colour.

 
  Cuprinol Decking Restorer is a fast acting unique formulation gel that transforms grey, weathered decking back to its original appearance.

 
  Cuprinol Decking Restorer takes just 15 minutes to work when applied in accordance to the manufacturer’s instructions. After use, brushes simply wash out in water. Cuprinol Decking Restorer is ideal for use before applying a protective finish such as Cuprinol Decking Oil, Cuprinol Decking Seal or Cuprinol Decking Stain.
 
     
 
Pack Sizes
2.5 L
 
 
How Much Is Needed
A 2.5 L pack is normally sufficient for 20m2
 
       
 
Preparing the surface
Remove excessive dirt and soiling with a stiff bristle brush. Clean off mould or algae using Cuprinol Decking Cleaner. Cuprinol Decking Restorer will only work on bare wood, strip off any surface coating before use.
   
 
How to apply
Wearing suitable protective gloves, stir well before use and apply Cuprinol Decking Restorer liberally with a paintbrush. The wood will start to lighten in colour. Immediately after application work into the surface of the wood using a mild abrasive scrubbing pad or stiff bristle brush. Leave to stand until no further lightening occurs, but for no more than 15 minutes. Work manageable areas at a time so that application, abrasion and washing off can be completed within 15 minutes. Wash off with plenty of water using a watering can or hose, do not use a high pressure washer. Allow the decking to dry thoroughly before use. In cases of severe weathering a further coat may be necessary to fully restore the colour. If necessary sand the wood to remove loose fibres and give a smooth base for finishing. To add colour and provide extra protection use Cuprinol Decking Oil or Cuprinol Decking Stain. Try a test area first to ensure satisfactory appearance and adhesion. Do not apply in temperatures below 5°C or if rain is likely before the job is complete.
Note: Undiluted Cuprinol Decking Restorer should not be allowed to come into contact with grass or plants as it may cause browning or die-back. When washing off, avoid splashing onto plants or grass, if this occurs dilute splashes with copious amounts of water.
   
 
Cleaning and storage
After use, remove as much material as possible from brushes before cleaning with clean water. Do not use or store in extremes of temperature and protect from frost. Clean up any spills while still wet. Reseal can after use.
   
       
 

Always read the pack instructions carefully before use.